More converts to the Proto K

Wongster has a pretty good swing but he has long being held back by his high torque driver shaft in a A flex.

with a swing speed of 95 mph, he will easily gain 20 to 30 metres more with a tighter dispersion within weeks.

thank you for coming by....DGman

Thks, DG-man.

I was horrified when you showed me how bad my stock shaft was.

Now with new life injected into my driver , I can go all out with confidence. =)

got you want attas-t2 in broomstick flex?

how abt tak attas in steel pipe flex for the strong muscle man fan from middle east

DGman wrote:

got you want attas-t2 in broomstick flex?

Hahahha.. i saw the attas at occ on sunday... i can't even bend it with my arms, so i dun think i can even swing it. Any DI???

all sold liao...did not even make it to forum....

ghoonk wrote:

aaaaaaaaaaaaaaaaaaa, you got a 70S! DGman told me NO STOCK!

You lucky you !!! You are in the clear. DGMan has made his stand clear now......

DGman wrote:

Yo Tour Slut...

when you were back, it was no stock..now 70 in stock but 60 R and S no stock...musical chair.

the only person who will get no stock is MC.

also the only person banned is WMF.

there is a new slut..Shaft Slut.

any shaft above 73 g in X flex he grabbed....

DGman

wah, so much has changed, but thanks for keeping me out of the NO STOCK zone.... boss, am curious if I would actually benefit from an R flex K shaft. Your thoughts?

DGman wrote:

all sold liao...did not even make it to forum....

Duval_S wrote:

Thannks DGMan....for this tip.....this was something which I was unclear but based on the pics...it is very clear.

Quote :

The secret of his power is revealed here....if you can stay down as late as him, you too will find exceptional power.

Looks like I am missing something here... Can somebody point me out: how low and how late it is???

low? waist level..
late? after 8 pm when its closed for the day.. :

rofl:

Agumon wrote:

low? waist level..
late? after 8 pm when its closed for the day.. :

rofl:

How does this translate to power?

IS......if your head can stay down at the ball position after you have swing through, you will get a flat left wrist and maximum arch extension at impact.

if your head is up early you will most likely cut the ball resulting in unwanted side spin and loss in power or simply do not benefit from a full release.

your sifu Justin Klahan was supposed to tell you that in lesson 2....haha

DGman

DGman wrote:

IS......if your head can stay down at the ball position after you have swing through, you will get a flat left wrist and maximum arch extension at impact.

if your head is up early you will most likely cut the ball resulting in unwanted side spin and loss in power or simply do not benefit from a full release.

your sifu Justin Klahan was supposed to tell you that in lesson 2....haha

DGman

DGman, got it... It is actually funny how we actually figured out the exact same thing a few days ago on the golf course. Mananta told us about it but he never really explain WHY we have to do this. We did notice that we get straighter and more controllable drive by doing so... we just didn't notic that we actually gained a few yards... I gotta go and see my sifu JK again in November. He is coming to Barclay, right?

Yarra wrote:

Agumon wrote:

low? waist level..
late? after 8 pm when its closed for the day.. :

rofl:

How does this translate to power?

Agumon, I was just playing with you Buddy...

i just received great news about your sifu....got to start another thread.....

you will be thrilled. i am very excited about this.

DGman

Can't wait!

DGman wrote:

IS......if your head can stay down at the ball position after you have swing through, you will get a flat left wrist and maximum arch extension at impact.

if your head is up early you will most likely cut the ball resulting in unwanted side spin and loss in power or simply do not benefit from a full release.

your sifu Justin Klahan was supposed to tell you that in lesson 2....haha

DGman

Boss, thanks for the tips. I have been facing this slice problem and I just could shake it away. Are the tips applicable for irons as well?

I'm quite sure that they do

DGman wrote:

i just received great news about your sifu....got to start another thread.....

you will be thrilled. i am very excited about this.

DGman

So what is this great news ?

there are some good news and some great news....

good news was Prayad Markseang brought the shaft out to Japan and came in 8th. won a lot of money.

and of course we have the 11 under from Udorn.

this week he is at Taiwan and it will be interesting to see what happens.

DGman

mmmm...going to huat very soon...got 48 inches shaft or not? hehehe

got......total build can be longer if you wish.

Hi Guys...

Just before i left Jakarta on Tuesday morning, i got a call from one of the BFG Indo partner, Victor. he seems breathless and was pretty excited as he was playing with a pro from the region.

Apparently, the pro he was playing him love his ball flight and distance and wanted to try his shaft. A couple of hits later, the pro asked if he can be fitted with the same shaft.

we then proceeded to change his attas on his DST cleveland and this is the man himself...

anyone knows who he is?



Another Proto K convert.....Mother not around.

DGman

Victor also thought the Proto K was a high spinning shaft from feel until he saw the nos on the trackman and the ball flight in play. after this episode he is very confident with the product that Yarra had also endorsed.

Dgman, im just a hacker, but still very bery happy with decision to pair the K with my 909D2. Ive never driven this straight before. Love the ball flight.

Im a convert thanks to golfamigo.