Anyone using Adams 9015d driver?

Hi,
looking for feedback from the holders in this forum on this driver. Quite keen to get it whether through eBay or GH. Can any of the users feedback on this driver? I know this is not one of the major brands that many of you are using. Seems to have have pretty good feedback on overseas forum. I have relative slow swing speed. Will this be suitable? If any of your want to sell ur 9015d do let me know. Thanks

-Terence

Got the successor of 9015D on order from Sellingers. Heard that it's the dogs bollocks and can't wait to get it in a few weeks.

Slow swing isnt the problem but more of can you swing open club face? I think it is 1-2degree open.

Hi trnm, u got the speedline? How much u pay for in total?

Khorkar, that I really not sure. haven't try that many driver

vcrpex: Friend helped me order the 7.5 Deg 9032LD (head only) for US$ 250 excluding shipping. Intend to shaft it with my old trusty Fujikura Rombax 7Z08 Stiff.

got the 9015D 8.5. Its longer than my Sumo 5900 8.5 and 905R 10.5, especially when you hit it at the sweet spot, it will go 20 m further (boring flight with lots of roll).

Hi Tronos, u bought it locally or online? Looking for a 10.5 one.

uS ebay. Around us $90.. Just a note its longer cause the 5900 is shorter length and lighter shaft while the 905r is a heavier and stiffer shaft. Dont worry too much about the open face just make sure the open face just get the right shaft. I put in a wrong shaft the nvs 65 regular and its a hooking machine

The tour issue 9015D is pretty good. But with all Adams driver, it feels horrible! But if you have to go with Adams, I'd say the Speedline Classic is still as good as it gets...

But I'd never hit the retail version, though... Just my 2-cents...

get the jamie sadlowski version 9032LD. the speedline classic not so easy to find le
h

Not that hard to find a Speedline Classic if you know who to ask and where to look...

I have a 9015D coming in tomorrow (with Accra M4 shaft) and picked up my 9016D head today. heading over to the fitter in half an hour to get it shafted, and will share impressions this weekend.

My TM drivers have been misbehaving, so they've been shelved for the time being. played the King Cobra L4V with Diamana wb63 over the weekend and despite HATING the sound at impact, it got me some good distances and i hit 12 fairways (shot 88 gross).

Have been hearing really rave reviews about the 9015D prototype (precursor to the 9016D, I think) and got them to see if they were really all that everyone says they are -- long, straight, and low spin with lots of roll. The L4Vs got excellent reviews as well

Ghoonk! Glad that you had a good game.

This weekend can I join you? I wld be back!

Hell, yeah! Let's play JGE -- shot a shitty round on Saturday (shot 87, mostly scrambling cos drives were not even close to fairway, and putting SUCKED, saved by short game) as I was too tired after the 4.5 hour round in 42C heat on Friday, no thanks to some really slow players in the 4-ball betterball tournament.

If you're up for it, we can play a 2.30 round and chiong all the way to the 18th

1430 tee off on! JGE Fire right???

Yarra wrote:

The tour issue 9015D is pretty good. But with all Adams driver, it feels horrible! But if you have to go with Adams, I'd say the Speedline Classic is still as good as it gets...

But I'd never hit the retail version, though... Just my 2-cents...

Yarra, how are the 9032LS heads? Couple of retail ones going cheap at WRX, was wondering if they are worth experimenting with.

ghoonk wrote:

I have a 9015D coming in tomorrow (with Accra M4 shaft) and picked up my 9016D head today. heading over to the fitter in half an hour to get it shafted, and will share impressions this weekend.

My TM drivers have been misbehaving, so they've been shelved for the time being. played the King Cobra L4V with Diamana wb63 over the weekend and despite HATING the sound at impact, it got me some good distances and i hit 12 fairways (shot 88 gross).

Have been hearing really rave reviews about the 9015D prototype (precursor to the 9016D, I think) and got them to see if they were really all that everyone says they are -- long, straight, and low spin with lots of roll. The L4Vs got excellent reviews as well

L4V X is as good as it gets. Despite the sound at impact, it is the only Acushnet product I would love to own...

hi ghoonk,
do let me know when you have tested your 9015d. i m more inclined to 9015d coz of the price and supposedly more friendly to lower swing speed ppl like me. the 9032ld seems to be more suitable for faster swing speed ppl as i have read. as i m still pretty new, would be looking for slightly older products to try without burning a hole in the pocket.

Yarra, thanks for the review. but beside ebay and sellingers, i do not really know where to look for the heads. can enlighten me if you have some reliable sources. thanks.

terence

ghoonk wrote:

Yarra wrote:

The tour issue 9015D is pretty good. But with all Adams driver, it feels horrible! But if you have to go with Adams, I'd say the Speedline Classic is still as good as it gets...

But I'd never hit the retail version, though... Just my 2-cents...

Yarra, how are the 9032LS heads? Couple of retail ones going cheap at WRX, was wondering if they are worth experimenting with.

Adams drivers (along with their other products such as their hybrids, fairway metals and, lately, their irons) are generally pretty good. It all comes back to your personal preference on feel, sound and look. I think they just do not have the ads to create all the hype like TM does.

I have yet to hit it personally, but I heard a lot of good things about it. Some say it is comparable to TM's legendary 282.

Ghoonk, give FT-9TA a try if you have not. It is great!