Project "Red Devil" and "White Knight"

Just wanna share a small little project of mine, i call them "Red Devil" and "White Knight"

The main motivation of this project is my 'hiao-ness', and after seeing Frostee's new toy, I was thinking maybe I can share mine also...keke

There it goes : 'Red Devil'

The original before transforming into 'Red Devil', it looks like this :



and the head look like these :





Here is the transformation process :

1. I removed the head, remove all paint, and fill it up with 'RED'






2. The shaft was change too, but use back the original grip. For Frostee, the shaft is a steel shaft, as you can see the prep portion on the shaft tip




3. Putting all these together and presenting 'Red Devil'
The paint fill was coated 3 times, to ensure that the 'Red' last longer, a very fine sandpaper (500 bits) were used to give a smoother surface on the sole.





As 'White Knight' is still waiting for one very important component to be fly over from US, I will post up 'White Knight' once it is done up.

Btw, I'm still struggling whether should I call it as "White Knight" or "White Angel"....since I have the 'devil'...hmmm...any suggestion ?..

Thank you for viewing

Snowman

Wow, a true blue golf fanatic. nice but not for me. As my Kung Fu not good enough, showy equipment will only make people laugh off their socks.

Wah chio leh. What paint you use? Can DIY yourself at home or must have special paint and sand paper equipment?

U missed the sight dot.

So are you gonna shaft in a Fubuki Alpha for your white project?

Pretty good! I bet you after this will be to treat your clubs to a different finish.

Gray wrote:

Wah chio leh. What paint you use? Can DIY yourself at home or must have special paint and sand paper equipment?

hi bro,

yes, most of the work are DIY, including paint fill and sand paper..the only thing that you might need help is the shaft portion..

but overall, i did this project all by myself...just for fun lah...haha !!

S70B wrote:

U missed the sight dot.

So are you gonna shaft in a Fubuki Alpha for your white project?

Pretty good! I bet you after this will be to treat your clubs to a different finish.

haha...yes, i miss the side dot....will get it done soon...

my white project will be on another putter....but i think Fubuki Alpha for R11 would look very chio..haha !!

initially, i wanted to send my putter for Polymer White coating for the white project....but cant find any local company doing that..except BOS..keke

wah. so what paint you use? Just buy from hardware shop? How abt the sand paper? Won't it scratch the metal?

Teach me leh...kekeke. I also wanna play play with my putter.

I found the white putter from TM has a pretty lame paint quality. It peels off easily.

Gray wrote:

wah. so what paint you use? Just buy from hardware shop? How abt the sand paper? Won't it scratch the metal?

Teach me leh...kekeke. I also wanna play play with my putter.

haha..I think you might need the following :

1. aceton : to remove original paint

2. sandpaper : go to DIY shop, ask for very fine sandpaper, on the back of the sandpaper, there is usually indication on brits...i use 500 brits..the higher the number, the more fine it is, 500 brits is what i would think the minimum i would accept, anything lower than 500 brit, it too rough. When performing the sanding, apply light force. Once done, use aceton to clean the surface.

3. Paintfill, i use Tamiya paint, where i bought from Kiddy Palace. before use, shake the paint well, then use cotton bug to dip lightly into the pain and apply to the where you want it to be. Once done, let it dry..i usually leave it there over night. Once dry, use normal nail polish remover to remove the excess paint. Dun use aceton to remove the excess. I do 3 coating, so this process need to be repeat 3 times.

Enjoy !!...keke

snowman

Yarra wrote:

I found the white putter from TM has a pretty lame paint quality. It peels off easily.

haha..luckily i din do that to my white project....haha !!

To me, the red shaft is kinda too much. It'll probably look better if the whole head is painted red. It's just me, though...

Yarra wrote:

To me, the red shaft is kinda too much. It'll probably look better if the whole head is painted red. It's just me, though...

haha, no worry bro...

me just trying out, but locally very difficult to find company that do very good steel finishing, that is why i din do more to the head and that lead me to try something to the shaft...keke

I painted a grapghite shaft long ago. I don't know if it's just me but the shaft felt kinda funny after. I sent it to a car body painting shop, one of the best there was locally. Did a great paint job on the shaft, though...

That's a pretty decent job you did there Snowman...can i pass mine to you for a refinishing job???

Yarra wrote:

I painted a grapghite shaft long ago. I don't know if it's just me but the shaft felt kinda funny after. I sent it to a car body painting shop, one of the best there was locally. Did a great paint job on the shaft, though...

Hi bro, that sounds good.

For the shaft I'm using, it's a steel shaft that originally come with the red coating. You can find more infor about the coated shaft from Vibrant Golf website.

Cheers

wilkang wrote:

That's a pretty decent job you did there Snowman...can i pass mine to you for a refinishing job???

Err....which putter u referring to ar ?
U have so many putters that I also lost count ...haha !!

Definitely not the EDEL...LOL
The Nike method 002.

wilkang wrote:

Definitely not the EDEL...LOL
The Nike method 002.

i only interested in EDEL...haha...*run away*....haha

Did you paint the shaft yourself? Looks good...

There are people here that do it professionally, and i *almost* got a smoke black shaft to go with my black ox putter.

Check out this link

edit: oops, i just realize you already know about Vibrant Golf lol.. gotta learn how to read the whole thread before replying next time.

solarpop wrote:

Did you paint the shaft yourself? Looks good...

There are people here that do it professionally, and i *almost* got a smoke black shaft to go with my black ox putter.

Check out this link

edit: oops, i just realize you already know about Vibrant Golf lol.. gotta learn how to read the whole thread before replying next time.

haha...yes.....vibrant golf coated steel shaft...
me is now just testing out the shaft, if these shaft are good, then more to come...haha !!

where did you buy the vibrant golf shaft from? ebay?

Shams... Too bad ur not my flex!!!
Have a spare PX6.0 in gun metal black done by vibrant golf

shamusan wrote:

where did you buy the vibrant golf shaft from? ebay?

hi bro

i think you can check their website and find out the dealer...if i'm not wrong, maybe WizGolf...but better to check their website first, just to be sure...

cheers

Wah~ i lost to you liao... My iron set not as chio as yours leh....

frosTEE wrote:

Wah~ i lost to you liao... My iron set not as chio as yours leh....

Haha... Remember that day we were talking about it, I actually wanted to show you this... well now you see it...keke