Callaway Razr Fit Pre-orders please check in:)

Good News and Bad News...

first the bad news, the Razr Fit which we have ordered are US Specs and they are scheduled to arrive in Sg around the first week of March.

now the good news - for those who cannot wait, we have make arrangements for you to change your order to J-Specs which will arrive at the Den by this Friday.

The difference is the US Specs comes standard with a 12g and 2 g weight, meaning you will tend to get a 45 inch driver playing from D3 to D5. The US specs do not come with the wrench.

The Japanese Specs comes standard with 6g and 2 g weight, meaning you will get a 45.5 inch driver playing to about D3. However the J specs comes with additional weight and pouch - 2g, 6g and 10g weights.

The SRP price (Panwest) is $871 for the J-specs and $771 for the US Specs. For those who have ordered, your special price is already quoted. To get the J-specs, you will only need to add S$80 for the upgrade.

All Razr Fit are ordered via Pan West Singapore on special arrangements without shafts and with new cog with head and headcover.

so do let me know your preference...


1. Asahi (9.5)
2. eiji (10.5)
3. InTheHole! (9.5)
4. Gerald Lee (9.5)
5. acidic88 (10.5)
6. Teo K.Y. (10.5)
7. Mark Chin (9.5)
8. Seebayho (11.5)
9. Keppel customer (9.5)
10. Keppel customer2 (10.5)
11. 2008 (9.5)

we have an additional 3 pcs left....if you do not know the price, please PM me.

Thanks.....DGman

Boss, as spoken earlier. Hehe

I will take j specs. Shaft I will give u a call tomorrow

eiji wrote:

I will take j specs. Shaft I will give u a call tomorrow

when u sell the driver remember to add me to your whatsapp group

i believe u have my contact

Eric, if i interpret correctly, you mean if intend to play shorter shaft should goes with US spec and longer shaft for J spec..

What is your recommendation if I want to fit a 44 or 44.5 inch shaft? Currently playing a 45" but always grip an inch lower.

I intend to play J spec, with 45inch shaft but at D0-D1 swing weight.

It is really long from a few golfer who swing this monster today

IMO, the J specs is more versatile in terms of playing your preferred length, shaping shots and also determining the swing weight and total weight of your choice. the 3 weights translate to 3 times the configuration if you want to try different lengths and especially if you may eventually want to have different shafts deployed on the same head.

it makes better sense at the upgrade price. if Eiji were to use the Fubuki K on a US specs, he will never be able to achieve a D0 on a 45 inch driver unless he use a very heavy grip which will increase the overall weight of the driver.

let me know so that i can get the heads in on Friday and you guys can play with your new WMD by this weekend. just ask Cockanathan aka acidic88 and he will tell you what the Razr has done for his drive.

DGman

Will go with J spec 10.5 instead of 9.5.

Thanks.

Any 8.5?

Boss, I will stay at US spec and wait till March. Need to get another limey green. Love the driver head as it is.

yes only tour issue at this point....Is



if you can explain correctly what the following entail, i will move mountain to get you one...



DGman

hahahahahahahahahaha



The rite of passage

come on Is, you can do better than that.....if you want your 8.5 that is....

If I am not wrong, herbal balls massage is the following,

1. Using herbs to put it into a bag and make it into a ball shape with a handle for holding by the masseur
2. The herbs will usually be heated up and typically contains ginger
3. The masseur will use the herbal balls and hit all over your back, legs, shoulders similar like a musician playing with the drum
4. This is suppose to remove additional "wind/hong" in your body

This is my limited knowledge on traditional urut.

ralliartlancer wrote:

If I am not wrong, herbal balls massage is the following,

1. Using herbs to put it into a bag and make it into a ball shape with a handle for holding by the masseur
2. The herbs will usually be heated up and typically contains ginger
3. The masseur will use the herbal balls and hit all over your back, legs, shoulders similar like a musician playing with the drum
4. This is suppose to remove additional "wind/hong" in your body

This is my limited knowledge on traditional urut.

Oh... now Asahi will be most disappointed.

Chris you want 8.5 degree driver? i can give you a diablo tour....

DGman wrote:

Chris you want 8.5 degree driver? i can give you a diablo tour....

Boss,

i dun mind. Any driver you give me i will take.

wait till you see the 8.5 left hand i have reserved for you...at least good for keeping the $10000 notes on the table when counting them.

1. Asahi (9.5)
2. eiji (10.5) J specs
3. InTheHole! (9.5) J specs
4. Gerald Lee (9.5) J specs
5. acidic88 (10.5)
6. Teo K.Y. (10.5)
7. Mark Chin (9.5) J specs
8. Seebayho (11.5)
9. Keppel customer (9.5) J specs
10. Keppel customer2 (10.5) J specs
11. 2008 (10.5) J specs

updated...please let me know if i have missed out anyone. J specs stock should be in the Den by Friday.

updated....

1. Asahi (9.5)
2. eiji (10.5) J specs
3. InTheHole! (9.5) J specs
4. Gerald Lee (9.5) J specs
5. acidic88 (10.5)
6. Teo K.Y. (10.5)
7. Mark Chin (9.5) J specs
8. Seebayho (11.5)
9. Keppel customer (9.5) J specs
10. Keppel customer2 (10.5) J specs
11. 2008 (10.5) J specs
12. shwong2003 (9.5) J specs

standby for wednesday evening delivery if we can muscle someone to shift the delivery schedule around.

i will instal some demon (NFS) shafts on spare adaptors for those who wants to try out BBs and Fubuki K.

at the same time you can also try out the Razr Fit FW on Fubuki Alpha but the Tour Ad UT is out on loan...yet again.

cheers...DGman

Eric, would you be free for fitting on next Monday afternoon?

what time is good for u 2008?

DGman wrote:

what time is good for u 2008?

What is your timing? I am free in the whole afternoon.

done monday 1 pm...see u......DGman